Oppo A57 EDL Point cph1701

The Oppo A57 EDL Point cph1701 is a Point that allows for a connection between a computer and your phone Oppo via the Qualcomm HS-USB QDLoader interface, This is done through Emergency Download Mode (EDL). in this guide, I share with you test point for Oppo A57.

if you want to edl mode Oppo A57, you need to find the correct edl test points on the motherboard. and then connect these two points, now your device connected to your Pc.

Emergency Download Mode allows advanced users to gain access to the bootloader of their smartphones, EDL mode typically used for diagnostic and flashing purposes.

Oppo A57 Test Point Image

Oppo A57 EDL Point

Oppo A57 EDL Point cph1701

  • Download & extract Qualcomm QCOM HS-USB QDLoader 9008 Driver on your pc
  • Then, Install the Qualcomm USB driver.
  • Power Off your Oppo A57 device
  • After that, Unlock the Oppo A57 phone back cover.
  • Remove the battery connector.
  • Connect your device to the Computer using a USB cable
  • Then Find EDL Pinout in your Motherboard.
  • Finally, at the same time, you need a Copper Wire to short that pinout + connect the battery connector.

Qualcomm QCOM HS-USB QDLoader 9008 Driver

  • Your phone has now successfully entered EDL mode.

Oppo A57 Unlock Pattern

  1. Download and open UMT Tool  Multi QcFire Tool
  2. Then Click on Read & tools tab.
  3. on Brand choose Oppo
  4. On Model choose A57
  5. Click on FORMAT FS.
  6. Power Off your Android device
  7. Remove the back cover and then, Remove Battery Cable
  8. Remove back panel of the device carefully.
  9. Then, Find the Test Point on circuit board
  10. Then Click on Execute.
  11. Click on Yes then wait.
  12. Finally, Would you like to reset FRP, Choose Yes.
  13. It’s Done.

How to fix Oppo A57 edl point not working

  • First, use to original cable USB
  • Then Check driver if not going edl 9008 model
  • Finally, Disconnect the battery and reconnect

Read More: Redmi 6a Flash File (Stock ROM)

Leave a Comment