Vivo S1 test point

The Vivo S1 EDL Point is a Point that allows for a connection between a computer and your phone Vivo via the Qualcomm HS-USB QDLoader interface, This is done through Emergency Download Mode (EDL). in this guide, I share with you test point for Vivo S1.

if you want to edl mode Vivo S1, you need to find the correct edl test points on the motherboard. and then connect these two points, now your device is connected on your Pc.

Emergency Download Mode allows advanced users to gain access to the bootloader of their smartphones, EDL mode is typically used for diagnostic and flashing purposes.

Vivo S1 Test Point Image

Vivo S1 Test Point

Vivo S1 test point

  • Download & extract chinese miracle 2 mtk service tool [pass 12345678] on your pc
  • Install chinese miracle 2 on your Computer.
  • Power Off your Android device
  • Remove the back cover and then, Remove Battery Cable
  • Remove back panel of the device carefully.
  • Then, Find the Test Point on circuit board
  • Run the chinese miracle 2 as an administrator.
  • then, Click Service
  • Now, Click Reset Settings / Format FS
  • Click Yes To confirme
  • Short bot points using any copper wire and Connect your device to the Computer using a USB cable at the same time.
  • Now your mtk port ready

Is EDL mode safe for regular users?

EDL mode designed for developers & technicians who have a deep understanding of firmware flashing and phone troubleshooting. For regular smartphone users, it not recommended to use EDL mode as it can potentially result in damaging the device or voiding the warranty.

Can I need any tools to access EDL mode?

Yes, accessing EDL (Emergency Download) mode on certain devices typically requires specific tools or methods. ”USB EDL cables – key combinations – Software tools – Test points”.

Read More: Download UMT Tool – Ultimate Multi QcFire Tool All Versions

Leave a Comment