Vivo V15 Pro EDL Point

EDL mode is a Test point used to enter the device into the EDL mode 9008 and is typically done to connection between a computer & Qualcomm phones via the Qualcomm HS-USB QDLoader interface. in this guide, i share with you how to VIVO V15 Pro EDL Point.

if you want to edl mode Vivo V15 Pro, you need to find the correct edl test points on the motherboard. and then connect these two points, now your device is connected on your Pc.

Vivo V15 Pro Test Point Image
Vivo V15 Pro EDL Point

Method 1: Vivo V15 Pro EDL Point

  • Download & extract qualcomm QCOM HS-USB QDLoader 9008 Driver on your pc
  • then, Install Qualcomm usb driver.
  • Power Off your Android device
  • Remove the back cover of the your Qualcomm android device
  • Remove Battery Cable
  • Find the Test Point on circuit board
  • Finally, you need a Copper Wire to short that pinout.

Qualcomm QCOM HS-USB QDLoader 9008 Driver

  • Connect your device to the Computer using a USB cable

Method 2: Fastboot Mode

  • Download & extract ADB and Fastboot Tool to your PC
  • then, extract the Fastboot file in your C:/ Drive
  • Power Off your Android Phone
  • Put it into the Bootloader Mode
  • then, Open the Fastboot Folder and type CMD
  • Finally, Enter the following command
fastboot oem edl

Method 3: ADB Mode

  • Download & extract ADB and Fastboot Tool to your Computer
  • then, Make sure extract the Fastboot file in your C:/ Drive
  • Open Device Settings and then Press About Device
  • Tap Developer Options continuously.
  • Go back to Settings and Open Developer Options
  • then, Enable USB Debugging mode
  • Connect your phone to your Pc
  • Finally, Open the CMD and then, Enter the following command:
adb reboot edl

Method 4: Fastboot To EDL Tool

  • Download & extract EDL Tool
  • Power off your Android device
  • Boot it into the Bootloader/Fastboot Mode
  • Then, Connect your device to the Computer
  • Run Reboot.Bat and Click Enter
  • Finally, Vivo V15 Pro will reboot to EDL Mode

How to Unlock Vivo V15 Pro

  • Open UMT Dongle (QcFire V7.1)
  • then, Click Tab on Read & Tool
  • Select Brand and model: Vivo V15 Pro
  • Choose Format FS 2 Vivo
  • Click on¬†Execute
  • you need a Copper Wire to short that pinout.
  • You can See Qualcomm USB Driver in Device Manager
  • Finally, Wait Until Completed

Hard Reset Vivo V15 Pro

  • Power Off your Android device
  • Remove the back cover of the your Qualcomm android device
  • Remove Battery Cable
  • Find the Test Point on circuit board
  • connect the correct ISP Pinout to the UFi Box.
  • Connect your device to the Computer using a USB cable
  • Then, Run the UFi Box.
  • Locate the scatter file and then, go to the Partition > Special Task on the UFI Box.
  • Click on Factory Reset.

Vivo V15 Pro after format stuck on logo solution

  • Power Off your Android device
  • Press and hold Volume Up + Power button until Vivo Fastboot.
  • Select Recovery Mode by using the Volume Down button and press the Power key to confirm.
  • then, Click Clear Data > Click Erase All Data and click OK.
  • Click Restart.

Read More: Vivo Y12 EDL Point Remove Screen Lock

Leave a Comment