Vivo Y21T EDL Point

The Vivo Y21T EDL Point is a Point that allows for a connection between a computer and your phone Vivo via the Qualcomm HS-USB QDLoader interface, This is done through Emergency Download Mode (EDL). in this guide, I share with you test point for Vivo Y21T.

if you want to edl mode Vivo Y21T, you need to find the correct edl test points on the motherboard. and then connect these two points, now your device is connected on your Pc.

Emergency Download Mode allows advanced users to gain access to the bootloader of their smartphones, EDL mode typically used for diagnostic and flashing purposes.

Vivo Y21T Test Point Image

Vivo Y21T EDL Point

Method 1: Vivo Y21T EDL Point

  • Download & extract qualcomm QCOM HS-USB QDLoader 9008 Driver on your pc
  • then, Install Qualcomm usb driver.
  • Power Off your Android device
  • Remove the back cover of the your Qualcomm android device
  • Remove Battery Cable
  • Find the Test Point on circuit board
  • Finally, you need a Copper Wire to short that pinout.

Qualcomm QCOM HS-USB QDLoader 9008 Driver

  • Finally, Connect your device to the Computer using a USB cable

Method 2: Fastboot Mode

  • Download & extract ADB and Fastboot Tool to your PC
  • then, extract the Fastboot file in your C:/ Drive
  • Power Off your Android Phone
  • Put it into the Bootloader Mode
  • then, Open the Fastboot Folder and type CMD
  • Finally, Enter the following command
fastboot oem edl

Method 3: ADB Mode

  • First, Download & extract ADB Tool to your Computer
  • Download & extract Fastboot Tool On your Pc
  • then, Make sure extract the Fastboot file in your C:/ Drive
  • Open Device Settings and then Press About Device
  • Tap Developer Options continuously.
  • Go back to Settings and Open Developer Options
  • then, Enable USB Debugging mode
  • Connect your phone to your Pc
  • Finally, Open the CMD and then, Enter the following command:
adb reboot edl

Read More: Redmi Note 10 Pro Max EDL Point

Leave a Comment