VIVO Y71 EDL Point

EDL mode is a Test point used to enter the device into the EDL mode 9008 and is typically done to connection between a computer & Qualcomm phones via the Qualcomm HS-USB QDLoader interface. in this guide, i share with you how to vivo y71 edl point.

if you want to edl mode Vivo Y71, you need to find the correct edl test points on the motherboard. and then connect these two points, now your device is connected on your Pc.

vivo y71 edl point image

Vivo Y71 EDL Point

Method 1: Vivo Y71 EDL Point

  • Download & extract qualcomm QCOM HS-USB QDLoader 9008 Driver on your pc
  • then, Install Qualcomm usb driver.
  • Power Off your Android device
  • Remove the back cover of the your Qualcomm android device
  • Find the Test Point on circuit board
  • Finally, you need a Copper Wire to short that pinout.

Qualcomm QCOM HS-USB QDLoader 9008 Driver

  • Connect your device to the Computer using a USB cable

Method 2: Fastboot Mode

  • Download & extract ADB and Fastboot Tool to your PC
  • then, extract the Fastboot file in your C:/ Drive
  • Power Off your Android Phone
  • Put it into the Bootloader Mode
  • then, Open the Fastboot Folder and type CMD
  • Finally, Enter the following command
fastboot oem edl

Method 3: ADB Mode

  • Download & extract ADB and Fastboot Tool to your Computer
  • Make sure extract the Fastboot file in your C:/ Drive
  • Open Device Settings and then Press About Device
  • Tap Developer Options continuously.
  • Go back to Settings and Open Developer Options
  • then, Enable USB Debugging mode
  • Connect your phone to your Pc
  • Open the CMD and then, Enter the following command:
adb reboot edl

Recovery Mode:

adb reboot recovery

bootloader/ fastboot:

adb reboot bootloader

Method 4: Fastboot To EDL Tool

  • Download & extract EDL Tool
  • then, Open the tool
  • Power off your Android device
  • Boot it into the Bootloader/Fastboot Mode
  • Finally, Vivo Y71 will reboot to EDL Mode

Method 5: Using hardware keys

  • Turn off the device and take a USB cable.
  • connect one end of the cable to the PC port and leave the other end unconnected to the phone.
  • then, press and hold Volume Up + Volume Down keys
  • after that, connect the other end of the USB cable with device.
  • Finally, the device will automatically boots into EDL mode.

Read More: Vivo V15 Pro EDL Point

Leave a Comment