The Vivo Y91C Test Point is a Point that allows for a connection between a computer and your phone Vivo via the UnlockTool interface, This is done through Emergency Download Mode (EDL). in this guide, I share with you test point for Vivo Y91C MTK.
Vivo Y91C MTK Test Point Image
How To Change IMEI on Vivo Y91C Via Unlock Tool
- Download & extract UnlockTool on your pc
- Install UnlockTool on your Computer.
- Power Off your Vivo Y91C device
- Remove the back cover and then, Remove Battery Cable
- Remove back panel of the device carefully.
- Then, Find the Test Point on circuit board
- Run the Unlocktool as an administrator.
- Click Mediatek and then Choose Model Vivo Y91C
- Click On Special Tab > Click Change IMEI
- Press IMEI1 and IMEI2 then, Click Write
- Short bot points using any copper wire and Connect your device to the Computer using a USB cable at the same time.
- Now, Power On the Vivo Y91C
- you are free to flash stock ROM on Vivo Y91C mobile.
Why Use Vivo Y91C Test Point
- Installing stock ROM on Vivo Y91C Phone
- Flashing Vivo Y91C without unlocking the bootloader
- Installing stock ROM easily
- Recovering a dead Vivo Y91C
How to fix Vivo Vivo Y91C Test point not working
- First, use to original cable USB
- Then Check driver if not going Vivo USB Driver
- Finally, Disconnect the battery and reconnect